ES593-D – Interface module
Functions at a glance
- Universal interface module
- Rugged compact metal housing
- PC connection via Ethernet interface (100 Mbit/s)
- 1 ETK and 2 XETK/Ethernet interfaces for demanding measurement applications
- 4 CAN interfaces
- Wake-up on CAN and buffering of CAN-Frames
- Acquisition of time synchronous measurements
- Seamless integration with INCA
- Open interface for integration with existing tool environments
Technical data
| Size and Weight | |
|
Size and Weight
Dimensions (HxWxD)
|
45 mm x 127 mm x 160 mm / 1.75 in x 5.0 in x 6.3 in (housing)
|
|
Size and Weight
Weight
|
0.8 Kg / 1.8 lbs
|
|
Size and Weight
Environment
|
|
|
Size and Weight
Temperature range
|
-40 °C to +70 °C / -40 °F to +158 °F (operation)
|
|
Size and Weight
|
-40 °C to +85 °C / -40 °F to +185 °F (storage)
|
|
Size and Weight
Relative humidity
|
0% to 85 % (Operations) , non-condensing
|
|
Size and Weight
|
0% to 95 % (Storage)
|
|
Size and Weight
Tested for
|
Mechanical shock, vibration, fall, temperature shock, temperature alteration, according to EN 60068 and ISO 16750
|
|
Size and Weight
Ingress protection
|
IP30
|
|
Size and Weight
Operating Current Range
|
5 A Max. (module max. 3A; o/p current per ETH 2 A max.)
|
|
Size and Weight
Power supply
|
|
|
Size and Weight
Operating voltage
|
7 V to 29 V DC
|
|
Size and Weight
Power consumption (at 14.4 V)
|
500 mA at 14.4 V (typical, operation)
|
|
Size and Weight
|
20 mA at 14.4 V (typical, stand-by)
|
|
Size and Weight
Power management (wake-up / stand-by)
|
Power-on/off when Ethernet traffic starts/stops (PC or upstream module on/off)
|
|
Size and Weight
Protection
|
Reverse voltage protection, load dump protection
|
|
Size and Weight
Ethernet interfaces
|
|
|
Size and Weight
Connection and protocols
|
10/100 Base-T; TCP/IP
|
|
Size and Weight
Time synchronization
|
Time resolution: 1 μs
|
|
Size and Weight
Power supply of connected devices
|
ES4xx and ES6xx measurement modules, XETKs
|
|
Size and Weight
ECU and bus interfaces
|
|
|
Size and Weight
|
2 x Independent CAN, 2 x Independent LIN, 1 x FlexRay node with two independent channel
|
|
Size and Weight
ETK
|
Operating Mode : Basic, Compatibility, Advanced, Protocol Transfer : Single Mode supports speed of 8Mbit/s Block Mode supports either 8Mbit/s or 100 Mbit/s
|
|
Size and Weight
LIN
|
LIN Transceiver: MCZ33661EF, Specification: LIN V2.1, Operating Mode: LIN Master
|
|
Size and Weight
FlexRay
|
Bus Driver: Philips TJA 1082, Payload: 254 bytes (Max.), Specification: V2.1
|
|
Size and Weight
CAN
|
2 channels, optionally High Speed (up to 1 MBaud) or Low Speed
|
|
Size and Weight
High Speed CAN
|
CAN Transceiver: TJA1040, Speed: Max. 1 MBaud with a bus length of 20 m
|
|
Size and Weight
Low Speed CAN
|
CAN Transceiver: TJA1054A, Speed: Max. 125 kBaud
|
|
Size and Weight
Status display
|
|
|
Size and Weight
LEDs
|
Operation, interfaces, synchronization
|
|
Size and Weight
Compatible hardware
|
|
|
Size and Weight
PC / ETAS Upstream Module
|
Desktop or Laptop PC with Ethernet port, ES592, ES593-D, ES595, and ES600 Network and Interface Modules
|
|
Size and Weight
ETAS Downstream Module
|
ES592, ES593-D, ES595, ES600 Network and Interface Modules, ES4xx and ES6xx Measurement Modules, ES910 Prototyping and Interface Module, XETK
|
|
Size and Weight
Support by ETAS software
|
|
|
Size and Weight
INCA
|
INCA V6.2.1 and up
INCA-LIN V6.2.3 and up |
|
Size and Weight
Firmware Update
|
Support starts from HSP V2.1.6
|
|
Size and Weight
Host interface
|
|
|
Size and Weight
Fast Ethernet
|
2 x 10 / 100BASE-T Ethernet (Downstream), ETH1, ETH2 supports ETAS device synchronization mechanism
|
|
Size and Weight
Ethernet
|
1 x 10 / 100BASE-T (Upstream)
|
|
Size and Weight
Host PC
|
Supports 100Mbit/s, full duplex RJ45 connection with 32-bit data bus
|
|
Size and Weight
Protocol
|
TCP/IP, Ethernet Switching (Layer 2), IEEE802.3
|
Contact us
Do you have any questions? Feel free to send us a message. We will be more than happy to help.
Contact us today!