ES583 – USB FlexRay bus interface
The ES583 module is an appropriate tool for any work with FlexRay-based bus systems and ECUs. The module can be used for measurement data acquisition, calibration, diagnostics and reprogramming of the ECU flash memory.
The ES583 module is a compact and cost-effective FlexRay bus interface. The compact module connects a PC to a FlexRay bus or a single ECU with FlexRay interface.
The ES583 module is connected to the PC via USB. Installation and configuration are easy. The power supply of the module is provided by the PC, an external power supply is therefore not required.
The integrated synchronization node allows initiating the communication with individual FlexRay ECUs. So, it is e.g. possible to update ECU prototypes outside the vehicle with a new software version without additional circuitry.
The ES583 module supports the open interface ETAS EBI-IP (ETAS ECU and Bus Interfaces Integration Package) providing the integration in software tools of third party suppliers.
Functions at a glance
- Compact and cost-efficient FlexRay interface for the PC
- Direct and easy connection via USB
- Appropriate for measurement, calibration, diagnostics and ECU flash programming
- Full INCA integration
- Electrical isolation of FlexRay interface and PC
- With integrated synchronization node
- Open interface for integration in software tools of third-party suppliers
Technical data
| Size and Weight | |
|
Size and Weight
Dimensions (HxWxD)
|
20 x 40 x 100 mm / 0.8 x 1.6 x 4 in (housing)
|
|
Size and Weight
Weight
|
120 g / 0.26 lb
|
|
Size and Weight
Environment
|
|
|
Size and Weight
Temperature range
|
-40 °C to +70 °C / -40 °F to +158 °F (operation)
|
|
Size and Weight
|
-40 °C to +85 °C / -40 °F to +185 °F (transport and storage)
|
|
Size and Weight
Relative humidity range
|
15 % to 95 %, non-condensing
|
|
Size and Weight
Power supply
|
|
|
Size and Weight
Current consumption
|
typ. 250 mA (at 4,71 V)
|
|
Size and Weight
|
Power provided by USB port of the host PC or laptop
|
|
Size and Weight
FlexRay interface
|
|
|
Size and Weight
FlexRay ports
|
One FlexRay node with channels A+B, DSUB 9 connector
|
|
Size and Weight
FlexRay version
|
FlexRay V2.1 rev. B
|
|
Size and Weight
Protocols
|
XCP-on-FLX[1], FLX-Monitoring[1]
|
|
Size and Weight
FlexRay transceiver
|
2 Flexray-Transceiver TJA1081
|
|
Size and Weight
Microcontroller
|
NXP LPC1850 ARM Cortex M3 Microcontroller
|
|
Size and Weight
Max. baud rate
|
10 Mbit/s
|
|
Size and Weight
Electrical isolation
|
Interface is magnetically decoupled
|
|
Size and Weight
PC interface
|
|
|
Size and Weight
USB
|
480 Mbit/s USB 2.0
|
|
Size and Weight
Integrated USB cable
|
1.5 m / 5 ft
|
|
Size and Weight
Host system requirements
|
|
|
Size and Weight
Operating system
|
Windows®8.x, Windows®10
|
|
Size and Weight
Support by ETAS Software
|
|
|
Size and Weight
|
INCA V7.1.4 and higher, INCA-FLEXRAY add-on is required
|
[1] Supported by INCA
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Contact us
Do you have any questions? Feel free to send us a message. We will be more than happy to help.
Contact us today!