ES421 – Eco thermo module
Your benefits
- Fast start-up with no additional hardware
- Efficient measurement data acquisition via Ethernet without restriction of data transfer at high sampling rates
- Easy integration into existing measurement systems by using the standardized XCP protocol for measurement data transfer and calibration as well as the UDP protocol for network communicationThe robust design ensures reliable use under extreme conditions
- Direct connection of the sensors using permanently installed sensor connecting cables allows the space-saving installation of the module in areas that are difficult to access
- Automatic measurement data synchronization when working together with other ETAS measuring modules
- Measurement data acquisition and analysis using professional software solutions such as INCA and MDA
Functions at a glance
- 8 electrically isolated channels, separately configurable
- Measurement range between -200 °C and 1372 °C
- Data acquisition rates between 0.1 Hz and 10 Hz, separately adjustable for each channel
- Robust, water- and dust-tight housings and connections (IP65)
- Operating temperature -40 °C to 120 °C (-40 °F to 248 °F)
Technical data
| Size and Weight | |
|
Size and Weight
Dimensions (HxWxD)
|
52 x 40 x 145 mm / 2.0 x 1.6 x 5.5 in
|
|
Size and Weight
|
39 x 40 x 63 mm / 1.5 x 1.6 x 2.5 in (tapered rear)
|
|
Size and Weight
Weight
|
450 g / 0.99 lbs
|
|
Size and Weight
Lengths of sensor connection cables
|
2x 125 mm / 4.92 in, 2 x 175 mm / 6.89 in, 2 x 225 mm / 8.86 in and 2x 275 mm / 10.83 in
|
|
Size and Weight
Environment
|
|
|
Size and Weight
Temperature range
|
-40 °C to +120 °C (-40 °F to +248 °F) (operation)
|
|
Size and Weight
|
-40 °C to +125 °C (-40 °F to +257 °F) (storage)
|
|
Size and Weight
Protection class
|
IP65
|
|
Size and Weight
Altitude
|
Deployable up to 5,000 m /16,400 ft
|
|
Size and Weight
Power supply
|
|
|
Size and Weight
Operating voltage
|
5 V to 50 V DC (-40 °C to +85 °C / -40 °F to +185 °F),
6 V to 50 V DC (+85 °C to +120 °C / +185 °F to +248 °F) |
|
Size and Weight
Power consumption (at 12 V)
|
2 W typ. (operation without load)
25 mW max. (standby) |
|
Size and Weight
Reverse voltage protection, load dump protection
|
Via cables CBEP410 / 415 / 420 / 430 / 450
|
|
Size and Weight
Host interface
|
|
|
Size and Weight
Ethernet connection and protocol
|
100 Base-T, Full-Duplex required, XCP-on-UDP/IP
|
|
Size and Weight
IP address
|
192.168.40.44 (default), configurable via INCA or ES400 configuration and integration tool for XCP applications
|
|
Size and Weight
Inputs
|
|
|
Size and Weight
Channels
|
8
|
|
Size and Weight
Supported thermocouples
|
Type K
|
|
Size and Weight
Measurement Range
|
-200 °C to 1372 °C / -328 °F to 2502 °F
|
|
Size and Weight
Sampling rate
|
0.1 Samples/s to 10 Samples/s, configurable per channel
|
|
Size and Weight
Anti-aliasing filter (in hardware)
|
Low-pass, one-stage, 350 Hz corner frequency
|
|
Size and Weight
Maximum isolation voltage [1]
|
100 V DC (Input to input or input to supply voltage ground or housing)
|
|
Size and Weight
Input impedance
|
20 MΩ II < 10 nF
|
|
Size and Weight
Accuracy
|
|
|
Size and Weight
Resolution
|
100 mK
|
|
Size and Weight
Measurement error
|
± 0,1% bzw. ± 0,5 K
|
|
Size and Weight
Temperature drift
|
± 00,2 K/K
|
|
Size and Weight
Error of cold junction compensation
|
± 0,8 K
|
|
Size and Weight
Temperature drift of cold junction compensation
|
± 0,004 K/K
|
|
Size and Weight
Support by ETAS software
|
|
|
Size and Weight
|
Supported by INCA V6.2.1 and higher, INCA-Add-on V1.1.12 and higher, ES400 configuration and integration tool for XCP applications V1.1.12 and higher, HSP Update-Tool V1.1.12 and higher, INTECRIO V3.2 and higher, ASCET-RP V6.1.0 and higher
|
[1] 60 V maximum for use inside the US.
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Contact us
Do you have any questions? Feel free to send us a message. We will be more than happy to help.
Contact us today!