Convert automotive into standard Ethernet signals

The ES160 is designed for use on a PC. The module can convert signals point-to-point, i.e. connect a computer to an ECU or mirror port. The external power connection with banana connectors (ES160.1) or safety banana connectors (ES160.1-S) allows it to operate without having to interconnect other hardware modules. This makes the ES160 easy to integrate into any development environment.

The ES160 uses a certified, robust LEMO connector for the connection to the automotive Ethernet source. The speed can be set manually to 100 Mbit or 1 Gbit or determined automatically. Connection to the host takes place via an RJ45 connector.

The ES162 is designed for use with the ES800 measurement, calibration, and prototyping system, including the ES820 drive recorder module. No additional power connection is required. The ES162 uses a certified, robust LEMO connector to connect to the automotive Ethernet source. The speed can be set manually to 100 Mbit or 1 Gbit or determined automatically. The connection to the host is also established via a LEMO connector, which can be connected to a GE port.

The ES165 is designed for use with the ES800 measurement, calibration, and prototyping system, the ES500 ECU and bus interface modules and the ES600 network module. It uses a certified, robust LEMO connector for the connection to the automotive Ethernet source. The speed can be set manually to 100 Mbit or 1 Gbit or determined automatically. The connection to the host is also established via a LEMO connector, which can be connected to an FE port.