State-of-the-art CAN FD extension
Your benefits
High performance
Improves baud rate up to 8 MBit with signal improvement capability (SIC) ransceiver.
Full reliability
Facilitates high level of stability with robust LEMO connectors/ splash water protection.
Scalable and integrable
Makes the set-up scalable and allows easy integration into other applications.
Advanced connectivity functions: full flexibility
The ES132.1 interface extension module comes with a wide range of state-of-the-art connectivity options specifically for the automotive industry:
- Connection to two independent CAN FD channels
- Connection to FE ports of other ETAS hardware devices using ETAS time synchronization hardware
- Support of CAN bus interface and SAE J2534-2 pass through
- Rendering of third-party software compatibility with ETAS BOA
- Equipped with the latest technology using SIC transceivers
Technical data
| Size and Weight | ||
|
Size and Weight
Dimensions (HxWxD)
|
92 mm x 48 mm x 24 mm / 3.62 in x 1.89 in x 0.92 in (housing)
|
|
|
Size and Weight
Dimension with the Integrated Cable
|
24 mm x 48 mm x 1592 mm / 0.95 in x 1.89 in x 62.68 in
|
|
|
Size and Weight
Weight
|
0.18 kg / 0.4 lb (with cable)
|
|
|
Size and Weight
Environment
|
||
|
Size and Weight
Temperature range
|
-40 °C to +60 °C / -40 °F to +140 °F (operation)
|
|
|
Size and Weight
|
-40 °C to +85 °C / -40 °F to +185 °F (transport and storage)
|
|
|
Size and Weight
Relative humidity range
|
15 % to 95 %, non-condensing
|
|
|
Size and Weight
Ingress Protection
|
IP42
|
|
|
Size and Weight
Power supply
|
||
|
Size and Weight
Power consumption
|
<500 mA Input current at 12V
|
|
|
Size and Weight
Operating Voltage
|
6 V- 32 V
|
|
|
Size and Weight
CAN FD / CAN interfaces
|
||
|
Size and Weight
Number of channels
|
2 CAN-FD SIC channels, with DSUB9 male connector
|
|
|
Size and Weight
SAE J2534 Pass Thru Interface
|
For use of the ES132.1 with 3rd party software applications. The J2534 interface is included in the ETAS ECU and Bus Interfaces Package (EBI-IP). This package can be downloaded from ETAS homepage.
|
|
|
Size and Weight
CAN FD Variant support
|
In CAN FD mode the protocol variants ISO / Non-ISO is software-configurable for each channel individually.
|
|
|
Size and Weight
Protocols
|
CAN 2.0B ISO 11898-1 and ISO ISO15765-4, ISO11898-2:2016
|
|
|
Size and Weight
CAN-Transceiver (Physical Layer)
|
High-speed SIC transceiver (TJA1462 ), Standard (V2.0a) or Extended Format (V2.0b), ISO High-speed mode, CAN-FD (non ISO CAN FD V1 and ISO 11898-2:2015 )
|
|
|
Size and Weight
Maximum baud rate for CAN
|
1 Mbit/s
|
|
|
Size and Weight
Maximum baud rate for CANFD
|
8 Mbit/s
|
|
|
Size and Weight
Electrical isolation
|
The CAN Interfaces are electrically isolated from the Host (Ethernet) interface
|
|
|
Size and Weight
Acquisition of synchronous data
|
||
|
Size and Weight
|
ES132.1 supports the ETAS Hardware Time Synchronization, i.e., connected to an FE connection on an ETAS device it is synchronized with 1µs to the other signals in that system.
|
|
|
Size and Weight
|
|
|
|
Size and Weight
Host requirements
|
||
|
Size and Weight
Ethernet
|
100BASE-T
|
|
|
Size and Weight
Connection
|
Lemo Connector, coded for ETAS FE sockets
|
|
|
Size and Weight
Status display
|
||
|
Size and Weight
LEDs
|
Operating state, interfaces
|
|
|
Size and Weight
Software support
|
||
|
Size and Weight
Firmware Update
|
Supported as of HSP V13.5.0
|
|
|
Size and Weight
INCA
|
Supported as of INCA V7.4.5
ES132.1 is integrated native into INCA like any other ETAS HW device. |
|
|
Size and Weight
Supported use cases
|
INCA supports all available CAN protocols on the ES132.1.
ES132.1 supports CAN based measurement modules |
|
|
Size and Weight
3rd Party SW support
|
Easy integration in any application by using the ETAS Bus Interfaces Integration Package (EBI-IP)
|
|
|
Size and Weight
Diagnostics
|
ODX-LINK V1.3 or higher, ODX-Flash
|
|
|
Size and Weight
Delivery content
|
||
|
Size and Weight
Accessories
|
CAN 120 ohm Termination Resistor 2xDSUB, CAN Interface Cable, OBDII J1962 - DSUB (16mc-9fc), 2m, CAN and FlexRay Interface Y-Cable, DSUB – 2 x DSUB (9fc-9mc+9mc), 0m3, CAN, LIN and FlexRay interface cable, DSUB-DSUB (9fc - 9mc + 9fc), 2 m
|
|
|
Size and Weight
ECU and BUS Interface module
|
ES132.1 CAN FD (2 x CAN FD) interface extension module with Lemo 1B FGC (8mc) Ethernet connection.
Including Y-Cable CBCF100.1-0m3 |
|
Contact us
Do you have any questions? Feel free to send us a message. We will be more than happy to help.
Contact us today!